TPS2111PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 84mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 386.84mW |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2111 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Output Current | 1.25A |
| Max Supply Current | 1.4μA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Current - Supply | 55μA |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - OFF | 5ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2111PW Overview
The case that it comes in is called 8-TSSOP (0.173, 4.40mm Width) case. The Tube case is ideal for packing the part. In this case, the part is mounted in the direction of Surface Mount. The voltage that is applied to the circuit is 2.8V~5.5V. It is not allowed for this component to operate below -40°C~85°C degrees. A component connected in Handheld/Mobile Devices would be a good fit for it. Device Source Selector Switch belongs to the Source Selector Switch category. It is possible to recognize the FET type as N-Channel. A 8 termination is available on the part. The device is designed with 8 pins. A part based on TPS2111 is used in this part. 2.8V provides its performance. Run 260 using this part's peak reflow temperature. As the part at 55μA is running on a supply current, this is needed to ensure that the part can continue to run. A part from the Power Management Circuits family is what we are talking about. In the part, you will find 8 pins. Outputs with 1 are available. If the input voltage is greater than 5.5VV, this chip is capable of being used. With an input voltage less than 2.8V V, the chip can be used. The part is capable of being delivered under 1.25A output current. As a result of this, 1.25A is the maximum output current that is capable of being delivered to the component. The device can be operated with a voltage supply of 5.5V on the supply line. This part has a 2 input that allows it to run. 6V is the maximum output voltage of this device. Keeping the device resistance within 84mOhm is recommended.
TPS2111PW Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2111PW Applications
There are a lot of Texas Instruments TPS2111PW Ideal Diode controller applications.
- Cell phones
- Active ORing for redundant power
- Reverse Polarity Protection
- Industrial motor drives
- PDAs
- Camera ECU
- Digital Radios
- Building automation
- Power supply reverse polarity protection
- Electronic point of sale
