TPS2112APWG4
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 55μA |
| Current - Output | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Current - Output 2 | 750mA |
| Height | 1.15mm |
| Length | 3mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS2112APWG4 Overview
A TSSOP case is included. The part is available with 8 terminations. There are 8 pins on it. In order to deliver its performance, it is powered by 2.8V. In order to run 260, a part's peak reflow temperature is utilized. This part is part of the Power Management Circuits family of parts. Several 8 pins are incorporated into the part. This device is powered by 55μA, which is the supply current it uses to operate. If 0.09mA is greater than 0, the supply current (Isup) should conduct. 1 outputs are available in the system. If the input voltage is greater than 5.5VV, this chip is capable of being used. A voltage less than 2.8VV can be used to drive the chip. The part is capable of being delivered under 750mA output current. It is possible for this device to operate at a voltage of 5.5V. In order to make the part run, there are 2 inputs. The part should only be used at temperatures above -40°C. Use the part at temperatures below 85°C.
TPS2112APWG4 Features
in a TSSOP case
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2112APWG4 Applications
There are a lot of Texas Instruments TPS2112APWG4 Ideal Diode controller applications.
- Industrial transport
- Active ORing for redundant power supplies
- Asset tracker
- Camera ECU
- Motor drives
- PCs
- Electronic point of sale
- PDAs
- Automotive ADAS systems - camera
- Power Tools
