TPS2112PWG4
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 55μA |
| Current - Output | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Current - Output 2 | 750mA |
| Height | 1.15mm |
| Length | 3mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS2112PWG4 Overview
The case comes with it. There are 8 terminations available in the part. There are 8 pins on the board and it is designed with them. Powered by 2.8V, it delivers high performance. For the purpose of running 260, this part's peak reflow temperature is utilized. The part is from Power Management Circuits family. This part contains 8 pins that are located on the surface. A supply current of 55μA is used to operate the device when it is in operation. Under 0.09mA, the supply current (Isup) should flow. There are 1 outputs available. It is possible to use the chip with voltages greater than 5.5V volts. It is possible to use the chip if the input voltage is less than 2.8V Volts. It is possible to deliver the part under a 750mA output current. When supplied with a voltage of 5.5V, this device will function. During the running of the part, 2 inputs must be provided. The part should only be used at temperatures above -40°C. The part should be heated to temperatures below 85°C.
TPS2112PWG4 Features
in a TSSOP case
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2112PWG4 Applications
There are a lot of Texas Instruments TPS2112PWG4 Ideal Diode controller applications.
- Digital Radios
- PCs
- Automotive battery protection
- Active ORing for redundant power supplies
- Active OR-ing of Redundant (N+1) Power Supplies
- Automotive infotainment systems - head unit,telematics control unit
- AC Rectifier
- Active ORing for redundant power
- Asset tracker
- Industrial transport
