TPS2112PWRG4
| Parameters | |
|---|---|
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 750mA |
| Delay Time - ON | 500μs |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2112 |
| Pin Count | 8 |
| Number of Outputs | 1 |
TPS2112PWRG4 Overview
There is a 8-TSSOP (0.173, 4.40mm Width) case that comes with it. Tape & Reel (TR) cases are suitable for packing the part. In this case, the part is mounted in the Surface Mount direction. An electric current of 2.8V~5.5V is applied to it. The minimum operating temperature of this component must not be -40°C~85°C. It is suitable for the component connected in Handheld/Mobile Devices. As a Source Selector Switch-type device, it is categorized. N-Channel is the type of FET. There are 8 terminations available in the part. In this case, 8 pins have been used to design it. TPS2112 is the base of this part. It is powered by 2.8V to deliver its perfomance. Run 260 using this part's peak reflow temperature. Part of the Power Management Circuits family. In this part, there are 8 pins. It uses a current of 55μA for powering its operation. If 0.09mA is greater than 0, the supply current (Isup) should conduct. In this case, 1 outputs are available. It is possible to use this chip with an input voltage that exceeds 5.5V volts. With an input voltage less than 2.8V V, the chip can be used. In terms of output current, the part can be delivered under 750mA output current. The component can be delivered a current of 750mA as an output. It is possible to operate this device with a supply voltage of 5.5V. This part has a 2 input that allows it to run.
TPS2112PWRG4 Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2112PWRG4 Applications
There are a lot of Texas Instruments TPS2112PWRG4 Ideal Diode controller applications.
- MP3 Players
- AC Rectifier
- Automotive infotainment systems - head unit,telematics control unit
- Asset tracker
- Building automation
- Reverse Polarity Protection
- Industrial motor drives
- Head Unit
- Power Tools
- PDAs
