TPS2113ADRBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 110Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 1W |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2113 |
| Pin Count | 8 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Operating Supply Current | 55μA |
| Output Current | 2A |
| Max Supply Current | 55μA |
| Adjustable Threshold | YES |
| Propagation Delay | 280 ps |
| Turn On Delay Time | 1 ms |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - OFF | 5ms |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2113ADRBT Overview
The case comes with it. Packing the part in Tape & Reel (TR) cases is ideal. In this case, the part is mounted in the Surface Mount direction. The voltage is set to 2.8V~5.5V. There must not be a minimum operating temperature of -40°C~85°C for this component. Suitable for components connected in Handheld/Mobile Devices. A Source Selector Switch device is categorized as such. In the case of FETs, N-Channel is recognized as the type. Among the options available for the part are 8 terminations. Pins are attached to it using 8 pins. As you can see, this part is based on TPS2113. Powered by 2.8V, it delivers high performance. This part's peak reflow temperature is utilized to run 260. It is part of the Power Management Circuits family. It is important to note that the part has 8 pins. In order for it to operate, a supply current of 55μA is used. Using the chip over 5.5V volts is allowed. It is possible to use the chip if the input voltage is less than 2.8V Volts. The part is capable of being delivered under 1.25A output current. As a result of this, 2A is the maximum output current that is capable of being delivered to the component. It is possible for this device to operate at a voltage of 5.5V. In order to run the part, it needs 2 inputs. The device resistance should stay within the range of 110Ohm.
TPS2113ADRBT Features
in a 8-VDFN Exposed Pad case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
operate supply voltage at 5.5V
2 inputs
TPS2113ADRBT Applications
There are a lot of Texas Instruments TPS2113ADRBT Ideal Diode controller applications.
- USB HUBs
- Reverse Polarity Protection
- Cell phones
- Building automation
- Head Unit
- Power supply reverse polarity protection
- Power Tools
- Asset tracker
- Automotive battery protection
- Automotive ADAS systems - camera
