TPS2114PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2114 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Delay Time - ON | 500μs |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2114PWRG4 Overview
The case is 8-TSSOP (0.173, 4.40mm Width)-shaped. Parts should be packed in Tape & Reel (TR) cases. Surface Mount is used to mount the part. A voltage of 2.8V~5.5V is applied to it. A minimum operating temperature of -40°C~85°C must not be reached by this component. A component connected in Handheld/Mobile Devices would be a good fit for it. It is classified as a Source Selector Switch device by the manufacturer. In this case, the FET type can be recognized as N-Channel. Among the options available for the part are 8 terminations. There are 8 pins on the board and it is designed with them. A part based on TPS2114 is used in this part. 2.8V provides its performance. To run NOT SPECIFIED, we use the peak reflow temperature of this part. It is a part from the Power Management Circuits family. It is a part that has 8 pins in it. For the operation of this device, an electric current of 55μA is used as the supply current. Isup (supply current) should conduct under 0.09mA. There are 1 outputs. In order to mount the part properly, it is recommended to mount it by Surface Mount. An input voltage over 5.5V V can be used with this chip. The chip can be used with an input voltage of less than 2.8V V. Delivery of the part is possible under 750mA output current. The component can be delivered a current of 750mA as an output. In order for this device to function, it requires a supply voltage of 5.5V.
TPS2114PWRG4 Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : NOT SPECIFIED
1 outputs
operate supply voltage at 5.5V
TPS2114PWRG4 Applications
There are a lot of Texas Instruments TPS2114PWRG4 Ideal Diode controller applications.
- Cell phones
- Factory automation and control - PLC digital output modules
- Automotive ADAS systems - camera
- Active ORing for redundant power supplies
- Industrial motor drives
- Automotive infotainment systems - head unit,telematics control unit
- Active OR-ing of Redundant (N+1) Power Supplies
- PDAs
- MP3 Players
- Active ORing for redundant power
