TPS2211AIDBG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Additional Feature | ALSO OPERATE ON 5V SUPPLY |
| Subcategory | Power Management Circuits |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2211 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Number of Channels | 3 |
| Interface | Parallel |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Number of Ports | 1 |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Switch Type | PCMCIA Switch |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:2 |
| Voltage - Load | 3.3V 5V 12V |
| Min Current Limit | 1A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 70m Ω |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2211AIDBG4 Overview
Tube is how it's packaged.This file is included in package 16-SSOP (0.209, 5.30mm Width).This LED driving board is mounted using the mounting type Surface Mount.It owns the PCMCIA Switch switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.In this LED driver, there are no outputs available.The LED driving board operates at Not Required volts.It is equipped with Status Flag features.It is part of the TPS2211 family of LED drivers.It contains 16 terminations.During operation, the 16 pins are used.It contains 1 functions.A supply voltage of 3.3V leads to high efficiency.16 pins are connected to it in total.Currently, the LED driving board has a resistance of 70mOhm ohms.Self-contained in an econtainer with a capacity of Power Management Circuits, this LED driver is self-contained.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.There are a total of 3 channels to choose from.By using this lighting driver, it is also possible to produce ALSO OPERATE ON 5V SUPPLY.
TPS2211AIDBG4 Features
Supplied from 3.3V
Resistance of 70mOhm
3 channels
Additional features like ALSO OPERATE ON 5V SUPPLY
TPS2211AIDBG4 Applications
There are a lot of Texas Instruments TPS2211AIDBG4 Power Switches ICs applications.
- USB Power Distribution
- Set-top-box
- Handheld Devices
- Portable GPS Device
- Storage (HDDs, SSDs)
- Wireless Headsets
- Low Voltage I/O System Power
- Portable GPS
- Mobile Communication Devices
- Telecom and Network Systems
