TPS2212IDB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 128.593437mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power Rating | 800mW |
| Max Power Dissipation | 775mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2212 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Max Output Current | 250mA |
| Voltage | 13.5V |
| Interface | Parallel |
| Number of Ports | 1 |
| Current | 250mA |
| Output Configuration | High Side |
| Power Dissipation | 775mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | PCMCIA Switch |
| Max Input Voltage | 13.5V |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 3:2 |
| Voltage - Load | 3.3V 5V 12V |
| Min Current Limit | 300mA |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 160m Ω |
| Height | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2212IDB Overview
It's?packaged?in?the way?of?a?Tube.In the 16-SSOP (0.209, 5.30mm Width) package, it is included.The lighting driver is mounted in the Surface Mount position.The switch type of this switch is PCMCIA Switch.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.There are 2 outputs available on this lighting driver.Operation is based on Not Required supply voltage.It has a total of Status Flag features.It comes under the family of TPS2212.A total of 16 terminations have been recorded.It is necessary to use the 16 pins in order to operate the LED driver.The LED driving board has a total of 1 functions.The maximum output current drops to 250mA in order to meet the operation criteria.The supply voltage of 3.3V is conducive to high efficiency.It is equipped with a total of 16 pins.160mOhm resistance is present in the lighting driver.The maximum input voltage of the LED driver is 13.5V volts.
TPS2212IDB Features
Supplied from 3.3V
Resistance of 160mOhm
TPS2212IDB Applications
There are a lot of Texas Instruments TPS2212IDB Power Switches ICs applications.
- Wearable Devices
- Portable GPS
- Hard Disk Drives
- Wireless Headsets
- Low Voltage I/O System Power
- PC Card Hot Swap
- HDD and SSD
- Wireless/Networking Cards
- Handheld Devices
- Portable/Handheld Devices
