TPS22914BYFPT
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Resistance | 38mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS22914 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2A |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Quiescent Current | 7.7μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.05V~5.5V |
| Rds On (Typ) | 37m Ω |
| Built-in Protections | TRANSIENT |
| Height | 500μm |
| Length | 0m |
| Width | 0m |
| Thickness | 0m |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XFBGA, DSBGA |
| Number of Pins | 4 |
TPS22914BYFPT Overview
It is package in Tape & Reel (TR) case.In the 4-XFBGA, DSBGA package, it is included.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.There is a default setting of 1 for output.A supply voltage of Not Required is required for it to operate.The maximum output voltage of this LED driver is N-Channel volts.As far as features are concerned, the LED driving board has Slew Rate Controlled.The TPS22914 family consists of this type.It has a total of 4 terminations.The operation is performed through the 4 pins.Currently, there are 1 functions associated with the lighting driver.In order to meet the operation criteria, the maximum output current drops to 2A.Using a voltage of 1.2V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has 38mOhm resistance.In this case, the output current is set to 2A.
TPS22914BYFPT Features
Supplied from 1.2V
Resistance of 38mOhm
TPS22914BYFPT Applications
There are a lot of Texas Instruments TPS22914BYFPT Power Switches ICs applications.
- Low Voltage I/O System Power
- Wireless/Networking Cards
- Hot Swap
- Hard Disk Drives
- Set-Top Boxes
- USB3.1 Power Delivery
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- Mobile Communication Devices
- Handheld Devices
