TPS22954DSQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto Restart, Load Discharge, Power Good, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS22954 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.5V~5.7V |
| Driver Number of Bits | 1 |
| Fault Protection | Over Temperature, UVLO |
| Rds On (Typ) | 14m Ω |
| Built-in Protections | TRANSIENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS22954DSQR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included in the package 10-WFDFN Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.The temperature should be set to -40°C~105°C TA to ensure reliable functioning.As a default, the output is set to 1.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts has been specified.This LED driving board is equipped with Auto Restart, Load Discharge, Power Good, Slew Rate Controlled features in order for it to be useful.It is a member of the TPS22954 family.It has a total of 10 terminations.During operation, the 10 pins are used.It has 1 functions.The maximum output current must drop to 5A to meet the operation criteria.Supply voltages of 3.3V allow for high efficiency.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.In this case, Vsup (maximum supply voltage) is set to 5.7V.Normal operation requires a voltage above 2.5V for the supply voltage.In this part, the power supply is set to 2.5/5V.
TPS22954DSQR Features
Supplied from 3.3V
TPS22954DSQR Applications
There are a lot of Texas Instruments TPS22954DSQR Power Switches ICs applications.
- Notebook PC
- Portable Devices
- Hot Swaps
- Wireless Headsets
- Wireless/Networking Cards
- Portable/Handheld Devices
- Solid State Drivers
- Hot-Swap Systems
- Hard Disk Drives
- Portable GPS Device
