TPS2330IDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Latched Fault, UVLO |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Additional Feature | REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2 |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~13V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Depth | 4mm |
| Base Part Number | TPS2330 |
| Pin Count | 14 |
| Output Voltage | 21V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Adjustable Threshold | YES |
| Current - Supply | 500μA |
| Output Current-Max | 500A |
| Nominal Input Voltage | 13V |
| Internal Switch(s) | No |
| Programmable Features | Circuit Breaker, Fault Timeout, Slew Rate |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2330IDR Overview
It's included in the 14-SOIC (0.154, 3.90mm Width) package.In the current state, 1 channels are accessible.The package resembles a Tape & Reel (TR).In total, it has 14 terminations.Device DUAL is located at the terminal position.14 pins make up the entire device.High efficiency can be achieved when the supply voltage is 4.5V.Surface Mount is set up this way.This electrical component belongs to the Hot Swap Controller classification.If you want reliable performance, you should set the temperature to -40°C~85°C.Hot-swappable device has General Purpose applications.There is a mention of it in Latched Fault, UVLO.With a 3V~13VV power source, it should work.The number TPS2330 belongs to the TPS2330 family.14 pins are used in operation.A gadget like this is self-contained in Power Management Circuits.Circuit Breaker, Fault Timeout, Slew Rate features are programmable.500μA is currently in short supply.Positioned in direction of Surface Mount, it is at a right angle.For normal operation, Vsup should be kept above 3V.The maximum current required for its operation is {0}.REQUIRES 3V TO 5.5V SUPPLY FOR CHANNEL 2 can also be produced by using this device.21V output voltages are capable of high efficiency.
TPS2330IDR Features
The terminal position of 14
Features of Latched Fault, UVLO
Programmable features of Circuit Breaker, Fault Timeout, Slew Rate
Output voltage of 21V
TPS2330IDR Applications
There are a lot of Texas Instruments TPS2330IDR hot swap controllers applications.
- Circuit breakers for electronic circuits
- Solid state circuit breakers
- Raid
- Network switches
- Loads
- Data communication systems
- High power circuit board
- Short-circuit protection in real time
- Temperature monitor output
- Base station
