TPS23753APWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Resistance | 1.2Ohm |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 13W |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 48V |
| Frequency | 248kHz |
| Base Part Number | TPS23753 |
| Pin Count | 14 |
| Input Voltage-Nom | 48V |
| Number of Channels | 1 |
| Operating Supply Current | 580μA |
| Power Dissipation | 13W |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.85mA |
| Nominal Input Voltage | 57V |
| Turn-Off Delay Time | 60 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Both |
| Min Current Limit | 405mA |
| Standards | 802.3at (PoE+), 802.3af (PoE) |
| Auxiliary Sense | No |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS23753APWR Overview
As part of the Tape & Reel (TR) package, PoE controller is embedded.There is a way in which it is packaged which is referred to as 14-TSSOP (0.173, 4.40mm Width).I would like to inform you that this PoE controller is of the Controller (PD), DC/DC type.Channels are growing strong/weak depending on the category: 1.For a reliable operation, -40°C~125°C is the PoE operating temperature.In order to operate this electrical Po E controller, it requires a voltage of 0V~57V as a supply voltage.An associated part can be established based on the base part number TPS23753.An 14 termination involves terminating a transmission line with a power over ethernet controller with a characteristic impedance that matches the line's characteristics.In addition, it is equipped with a 14 pin count.This Po E controller is included in Switching Regulator or Controllers.In order to make it work, it has 14 pins on it.There is a 260 thermal peak of this electrical ethernet power controller (Cel).There should be more voltage supplied than 48V.It reaches 0.85mA when the maximal current (Isup) supplied for it to operate is reached.For 580μA to be able to fully perform its function, a supply current needs to be provided.There is a frequency 248kHz associated with this electrical PoE ethernet controller.Resistance of this PoE controller is 1.2Ohm (*), which is the value of the resistance.
TPS23753APWR Features
Tape & Reel (TR) package
14 pin count
14 pins
1.2Ohm (Ω)
TPS23753APWR Applications
There are a lot of Texas Instruments TPS23753APWR Power Over Ethernet (PoE) Controllers applications.
- WLAN Access Points
- Pico-base Stations
- High Power Wireless Data Systems
- Wireless Access Points
- Pass-through System
- Multiband access points
- Power over Ethernet
- POS Terminals
- Midspan Applications
- Power Modules
