TPS23770PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Controller (PD), DC/DC |
| Resistance | 1Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1.2W |
| Voltage - Supply | 0V~67V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Frequency | 565kHz |
| Base Part Number | TPS23770 |
| Pin Count | 20 |
| Output Voltage | 5.5V |
| Input Voltage-Nom | 48V |
| Number of Channels | 1 |
| Operating Supply Current | 1.3mA |
| Nominal Supply Current | 1mA |
| Power Dissipation | 13W |
| Output Current | 1A |
| Power - Max | 12.95W |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Bandwidth | 2MHz |
| Nominal Input Voltage | 67V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Both |
| Min Current Limit | 405mA |
| Standards | 802.3af (PoE) |
| Auxiliary Sense | No |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS23770PWP Overview
PoE controller is part of the Tube package, which is included in the download.It is packaged in a way that resembles 20-PowerTSSOP (0.173, 4.40mm Width).Controller (PD), DC/DC is the type of PoE controller that this is.A strong/weak channel growth trend has been observed: 1.In order to maintain reliability, PoE operates at a temperature of -40°C~85°C.Electricity is supplied to this Po E controller by voltage 0V~67V.It is possible to find the Po E controllers of the base part number by using the base part number TPS23770.A 20 termination involves terminating the transmission line with a power over ethernet controller of the same impedance as the line.During normal operation, this electrical ethernet over power controller will produce 12.95W Watts of power.As you can see from the image, it is equipped with 20 pin count.The Po E controller in question is included in the package Switching Regulator or Controllers.This board is designed with 20 pins.In the case of this electrical ethernet power controller, the peak reflow temperature (Cel) is 260 degrees Celsius.For 1.3mA to fully function, the supply current must be provided.At 565kHz frequencies, this electrical PoE ethernet controller operates.With 1A's maximum output current, maximum design flexibility is possible.Resistance is?a measure of the opposition to current flow in an electrical circuit.?The resistance of this PoE controller is 1Ohm (Ω). The output voltage of this power over ethernet controller is 5.5V.
TPS23770PWP Features
Tube package
20 pin count
20 pins
The output current of 1A
1Ohm (Ω)
TPS23770PWP Applications
There are a lot of Texas Instruments TPS23770PWP Power Over Ethernet (PoE) Controllers applications.
- Pass-through System
- WLAN Access Points
- IEEE 802.3af Compliant PoE Powered Devices
- Wireless Access Points
- Higher Power Ethernet Powered Devices
- Wireless LAN Access Point/WiMAX? Base Station
- Security Cameras
- Dual Signature PD/Forced UPOE
- High Temperature Industrial Applications
- IEEE 802.3bt (Draft) Compliant Devices
