TPS2378DDA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Controller (PD) |
| Resistance | 750mOhm |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 3.9V |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.4V |
| Base Part Number | TPS2378 |
| Operating Supply Voltage | 57V |
| Number of Channels | 1 |
| Operating Supply Current | 960μA |
| Output Current | 850mA |
| Adjustable Threshold | NO |
| Output Power | 30W |
| Power - Max | 25.5W |
| Min Input Voltage | 0V |
| Max Input Voltage | 57V |
| Nominal Input Voltage | 57V |
| Internal Switch(s) | Yes |
| Max Duty Cycle | 78 % |
| Standards | 802.3at (PoE+), 802.3af (PoE) |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TPS2378DDA Overview
Embedded in the Tube package, it is used by many applications.The packaging is in 8-PowerSOIC (0.154, 3.90mm Width)'s style.Controller (PD) is the type of PoE controller.Strong/weak channels are increasing: 1.For a reliable operation, -40°C~85°C is the PoE operating temperature.This electrical Po E controller receives its supply voltage from 0V~57V.It is possible to find the Po E controllers of the base part number by using the base part number TPS2378.A 8 termination involves terminating the transmission line with a power over ethernet controller of the same impedance as the line.It has a maximum power of 25.5W Watts.A Po E controller like this is included in Power Management Circuits.There is a 8 pin design on this board.During reflowing of the electrical ethernet power controller, the peak temperature (Cel) reaches 260 °C.The supply voltage should be greater than 1.4V.The mounting is in the Surface Mount-axis.In order for 960μA to perform its proper functions, it needs to have a current supply that is adequate.With 850mA's maximum output current, maximum design flexibility is possible.It is important to note that the operating supply voltage of this PoE controller is 57V.Also, it has RESET THRESHOLD VOLTAGE IS 3.9V as a characteristic.Resistance is?a measure of the opposition to current flow in an electrical circuit.?The resistance of this PoE controller is 750mOhm (Ω). Power output of this ethernet over power controller is 30W watts.An power over ethernet PoE controller of this type has a maximum input voltage of 57V.An power over the ethernet controller of this type requires a minimal input voltage of 0V.
TPS2378DDA Features
Tube package
8 pins
The output current of 850mA
750mOhm (Ω)
TPS2378DDA Applications
There are a lot of Texas Instruments TPS2378DDA Power Over Ethernet (PoE) Controllers applications.
- Internet Appliances
- Wireless Access Points
- IEEE 802.3af Compliant PoE Powered Devices
- High Power Wireless Data Systems
- Non-Compliant, Application Specific Devices
- Pass-through System
- Industrial Automation Equipment
- IP Phone Power Management
- 4PPOE
- Commercial Information Displays
