TPS2410PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | N+1 ORing Controller |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2410 |
| Pin Count | 14 |
| Output Voltage | 10.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Power Dissipation | 404mW |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Nominal Input Voltage | 16.5V |
| Turn-Off Delay Time | 130 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2410PWR Overview
The case that it comes in is called 14-TSSOP (0.173, 4.40mm Width) case. It is suited to pack the part in Tape & Reel (TR) case. There is a Surface Mount-axis mounted on the part. An electric current of 3V~16.5V is applied to it. It must not be possible for this component to operate at -40°C~85°C°C as its minimum operating temperature. A component connected in N+1 Power Supplies, High Availability would be a good fit for it. There is a N+1 ORing Controller classification for the device. Among all the types of FETs, there is a type which is known as N-Channel, which can be recognized by its graphical representation. There are 14 terminations available in the part. Pins are positioned on 14 axes. The part is based on TPS2410. 5V provides its performance. This part's peak reflow temperature is utilized to run 260. In this case, the part belongs to the Power Management Circuits family. As you can see, the part is equipped with 14 pins. For this part, Vsup cannot be less than 3V. For the operation of this device, an electric current of 4.25mA is used as the supply current. Using the chip over 16.5V volts is allowed. There are certain situations in which the chip can be used with input voltages as low as 800mV V. Its max output voltage amounts to 10.2V. In 1.2mA, quiescent current is used.
TPS2410PWR Features
in a 14-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
14 terminations
Peak Reflow Temperature (Cel) : 260
TPS2410PWR Applications
There are a lot of Texas Instruments TPS2410PWR Ideal Diode controller applications.
- PDAs
- Reverse Polarity Protection
- Building automation
- Industrial motor drives
- MP3 Players
- Modems
- Alternator
- Cell phones
- Motor drives
- Automotive battery protection
