TPS2411PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 250mW |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2411 |
| Pin Count | 14 |
| Output Voltage | 10.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Quiescent Current | 1.2mA |
| Current - Supply | 4.25mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Nominal Input Voltage | 16.5V |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 130ns |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2411PW Overview
This item comes in a 14-TSSOP (0.173, 4.40mm Width) case. It is suited to pack the part in Tube case. Part Surface Mount is mounted. A voltage of 3V~16.5V is applied to it. It must not be possible for this component to operate at -40°C~85°C°C as its minimum operating temperature. It is designed to fit the component that is connected in N+1 Power Supplies, High Availability position. Device N+1 ORing Controller belongs to the N+1 ORing Controller category. In the case of FETs, N-Channel is recognized as the type. The part comes with 14 terminations. The device is designed with 14 pins. Based on TPS2411, this part is manufactured. Performance is delivered by 5V. As part of the 260 process, the peak reflow temperature of this part is utilized. The purpose of this is to run the supply current for the part at 4.25mA in order to run it correctly. Part of the Power Management Circuits family. Several 14 pins are incorporated into the part. This part should have a voltage supply of at least 3V (Vsup). An input voltage of more than 16.5V V can be used with the chip. There are certain situations in which the chip can be used with input voltages as low as 800mV V. Its max output voltage amounts to 10.2V. At 1.2mA, it uses the quiescent current as its power source.
TPS2411PW Features
in a 14-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
14 terminations
Peak Reflow Temperature (Cel) : 260
TPS2411PW Applications
There are a lot of Texas Instruments TPS2411PW Ideal Diode controller applications.
- Active OR-ing of Redundant (N+1) Power Supplies
- PDAs
- Digital Radios
- Factory automation and control - PLC digital output modules
- Building automation
- AC Rectifier
- Industrial transport
- Industrial motor drives
- Automotive battery protection
- USB HUBs
