TPS2411PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 59.987591mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2411 |
| Pin Count | 14 |
| Output Voltage | 10.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Power Dissipation | 404mW |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Nominal Input Voltage | 16.5V |
| Turn-Off Delay Time | 130 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2411PWRG4 Overview
The case comes in 14-TSSOP (0.173, 4.40mm Width) shape. In Tape & Reel (TR) cases, the part will be well protected. I would like to point out that the part is mounted in the way of Surface Mount. There is a voltage of 3V~16.5V applied to it. It is not allowed for this component to operate below -40°C~85°C degrees. There is a perfect fit between it and the component connected in N+1 Power Supplies, High Availability. As far as the device classification is concerned, it falls under the N+1 ORing Controller category. A type of FET known as N-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. The part is available with 14 terminations as an option. As you can see, it is designed with 14 pins. TPS2411 is the basis for the part. Performance is delivered by 5V. To run 260, we utilize the part's peak reflow temperature. A Power Management Circuits family part is involved in the project. Several 14 pins are incorporated into the part. For this part, Vsup cannot be less than 3V. In order for it to operate, a supply current of 4.25mA is used. An input voltage over 16.5V V can be used with this chip. It is possible to use this chip with an input voltage below 800mV volts. This device's maximum output voltage is 10.2V. During quiescent current, 1.2mA is used as the current source.
TPS2411PWRG4 Features
in a 14-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
14 terminations
Peak Reflow Temperature (Cel) : 260
TPS2411PWRG4 Applications
There are a lot of Texas Instruments TPS2411PWRG4 Ideal Diode controller applications.
- Active ORing for redundant power
- AC Rectifier
- Electronic point of sale
- Power Tools
- Cell phones
- Head Unit
- USB HUBs
- Alternator
- Active OR-ing of Redundant (N+1) Power Supplies
- Motor drives
