TPS2413PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | N+1 ORing Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2413 |
| Pin Count | 8 |
| Output Voltage | 10.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Nominal Supply Current | 4.25mA |
| Power Dissipation | 250mW |
| Output Current | 290μA |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Nominal Input Voltage | 16.5V |
| Turn-Off Delay Time | 130 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2413PWR Overview
The case comes with it. It is suited to pack the part in Tape & Reel (TR) case. There are two ways in which this part is mounted. It is given a voltage of 3V~16.5V. It must not be possible for this component to operate at -40°C~85°C°C as its minimum operating temperature. Suitable for components connected in N+1 Power Supplies, High Availability. It is classified as a N+1 ORing Controller device by the manufacturer. There is a N-Channel type of FET. The part is available with 8 terminations. In this case, 8 pins have been used to design it. TPS2413 is the basis for the part. Powered by 5V, it delivers high performance. In order to run 260, a part's peak reflow temperature is utilized. The part is from Power Management Circuits family. There are 8 pins in the part. This part requires a voltage supply (Vsup) of 3V or greater. In order to operate it, 4.25mA is used as the supply current. An input voltage over 16.5V V can be used with this chip. Input voltages less than 800mV Volts are suitable for this chip, as long as the voltage input is not excessive. 290μA is the output current that can be delivered to the component in terms of its output voltage. There is a maximum voltage of 10.2V at its output. In 1.2mA, quiescent current is used.
TPS2413PWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
TPS2413PWR Applications
There are a lot of Texas Instruments TPS2413PWR Ideal Diode controller applications.
- Automotive battery protection
- Automotive ADAS systems - camera
- AC Rectifier
- PCs
- USB HUBs
- Building automation
- Electronic point of sale
- Head Unit
- Power supply reverse polarity protection
- MP3 Players
