TPS2413PWRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 40.001177mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | N+1 ORing Controller |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | N+1 Power Supplies, High Availability |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 3V~16.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2413 |
| Pin Count | 8 |
| Output Voltage | 10.2V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Operating Supply Current | 4.25mA |
| Nominal Supply Current | 4.25mA |
| Power Dissipation | 250mW |
| Output Current | 290μA |
| Quiescent Current | 1.2mA |
| Min Input Voltage | 800mV |
| FET Type | N-Channel |
| Max Input Voltage | 16.5V |
| Nominal Input Voltage | 16.5V |
| Turn-Off Delay Time | 130 ns |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2413PWRG4 Overview
It comes in 8-TSSOP (0.173, 4.40mm Width) case. In Tape & Reel (TR) cases, the part will be well protected. Mounting is done along the Surface Mount-axis. The voltage is set to 3V~16.5V. A minimum operating temperature of -40°C~85°C must not be reached by this component. Suitable for components connected in N+1 Power Supplies, High Availability. It is classified as a N+1 ORing Controller device by the manufacturer. A type of FET known as N-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. A 8 termination is available on the part. It is designed with 8 pins. TPS2413 is the base of this part. Powered by 5V, it delivers high performance. A maximum reflow temperature of this part is used if 260 is to be run. In this case, the part belongs to the Power Management Circuits family. There are 8 pins in the part. This part should have a voltage supply of at least 3V (Vsup). 4.25mA is the supply current that is used for the operation of the device. An input voltage of more than 16.5V V can be used with the chip. Input voltages less than 800mV Volts are suitable for this chip, as long as the voltage input is not excessive. The component can receive an output current of 290μA. A maximum output voltage of 10.2V can be obtained from this device. At 1.2mA, it uses quiescent current.
TPS2413PWRG4 Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
TPS2413PWRG4 Applications
There are a lot of Texas Instruments TPS2413PWRG4 Ideal Diode controller applications.
- MP3 Players
- Head Unit
- Power Tools
- Building automation
- Cell phones
- PDAs
- Reverse Polarity Protection
- Industrial motor drives
- Alternator
- AC Rectifier
