TPS2541RTER
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | USB Switch |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 73m Ω |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS2541 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
TPS2541RTER Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the 16-WFQFN Exposed Pad package.The lighting driver is mounted in the Surface Mount position.USB Switch is the switch type it owns.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Load Discharge, Status Flag features.This object belongs to the TPS2541 family.It contains 16 terminations.The 16 pins are used for the operation of the system.There are 1 functions of the LED driver.Maximum output current falls to 2.5A when operation criteria are met.High efficiency is possible when the supply voltage is set to 5V.It is positioned in the direction of Surface Mount.A total of 16 pins are present on it.It is self-contained in an econtainer with a capacity of Power Management Circuits.The Vsup value (maximum supply voltage) is set to 5.5V.In order to operate normally, the supply voltage (Vsup) must remain above 4.5V.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.The total number of channels is 1.This part has a power supply of 5V volts.
TPS2541RTER Features
Supplied from 5V
1 channels
TPS2541RTER Applications
There are a lot of Texas Instruments TPS2541RTER Power Switches ICs applications.
- Wireless/Networking Cards
- Storage (HDDs, SSDs)
- Wireless Modem Data Cards
- Telecom and Network Systems
- Wireless Headsets
- Smartphone and PDA
- PC Card Hot Swap
- Hot Swaps
- Hot-Swap Systems
- Set-Top Boxes
