TPS2551DRVTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 1.33W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2551 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.1A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Height | 750μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2551DRVTG4 Overview
The package is in the form of a Tape & Reel (TR).Package 6-WDFN Exposed Pad contains it.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type that it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.Voltage output is N-Channel volts at maximum.There are Slew Rate Controlled features available on the LED driving board.It belongs to the TPS2551 family.A total of 6 terminations can be found in it.In order to operate, 6 pins are used.Currently, the lighting driver has a total of 1 functions.The LED driver output is limited to 1.1AV.High efficiency is possible when the supply voltage is set to 3.3V.As a result, it is mounted in the manner of Surface Mount.The LED driver has a total of 6 pins.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.There are a total of 1 channels to choose from.The maximum input voltage is 6.5V volts.It requires 2.5V volts as the minimum input voltage.
TPS2551DRVTG4 Features
Supplied from 3.3V
1 channels
TPS2551DRVTG4 Applications
There are a lot of Texas Instruments TPS2551DRVTG4 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Hot-Swap Systems
- USB Power Distribution
- Wireless Headsets
- Portable/Handheld Devices
- Solid State Drivers
- Solid-State Drives
- Storage (HDDs, SSDs)
- USB Power Distribution
- Portable Devices
