TPS2552DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 85mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 285mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS2552 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.2A |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 285mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Nominal Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 85m Ω |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2552DBVT Overview
The package is in the form of a Tape & Reel (TR).There is a SOT-23-6 package that includes it.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.There is a default setting of 1 for output.A voltage of Not Required is used to power it.A maximum voltage of N-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.It is part of the TPS2552 family of LED drivers.As a result, there are 6 terminations.The operation is carried out using the 6 pins.As far as the lighting driver is concerned, there are 1 functions.From the lighting driver, there is a maximum output of 1.5AV.Maximum output current falls to 1.2A when operation criteria are met.With a supply voltage of 5V, high efficiency is possible.A total of 6 pins are included in this LED driver.It has a resistance of 85mOhm.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.The total number of channels is 1.It has a maximum input voltage of 6.5V volts.As far as input voltage goes, it has a minimum of 2.5V volts.
TPS2552DBVT Features
Supplied from 5V
Resistance of 85mOhm
1 channels
TPS2552DBVT Applications
There are a lot of Texas Instruments TPS2552DBVT Power Switches ICs applications.
- Hard Disk Drives
- Gaming
- Hot Swap
- USB3.1 Power Delivery
- Notebook and Tablet Computers
- Low Voltage I/O System Power
- Portable GPS
- PC Card Hot Swap
- Wearable Devices
- Handheld Devices
