TPS2552DRVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power Rating | 1.33W |
| Max Power Dissipation | 715mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2552 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.2A |
| Number of Channels | 1 |
| Voltage | 6.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 715mW |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Nominal Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2552DRVT Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a package for it in the 6-WDFN Exposed Pad package.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.There is a TPS2552 family of things that it belongs to.It contains 6 terminations.In order to operate, 6 pins are used.The LED driver has 1 functions.This operation requires the maximum output current to be decreased to 1.2A.The supply voltage can be 5V for high efficiency.There are 6 pins in total on this board.In this case, there is 100mOhm resistance in the LED driving board.It is set to 1.5A in this case.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.In total, 1 channels are available.It has a maximum input voltage of 6.5V volts.As far as input voltage goes, it has a minimum of 2.5V volts.
TPS2552DRVT Features
Supplied from 5V
Resistance of 100mOhm
1 channels
TPS2552DRVT Applications
There are a lot of Texas Instruments TPS2552DRVT Power Switches ICs applications.
- Telecom and Network Systems
- Mobile Communication Devices
- Storage Drives
- Low Voltage I/O System Power
- Gaming
- Set-top-box
- Portable Video Game Players
- Hard Disk Drives
- Wireless Modem Data Cards
- USB Ports/Hubs
