TPS2553DRVT-1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Power Rating | 1.33W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2553 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Voltage | 6.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current | 1.5A |
| Output Configuration | High Side |
| Power Dissipation | 1.33W |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6.5V |
| Nominal Input Voltage | 6.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2553DRVT-1 Overview
It is packaged in the manner of a Tape & Reel (TR).There is a 6-WDFN Exposed Pad package that includes it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.Operation is based on a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.As you can see, it comes from the TPS2553 family.In total, there are 6 terminations.In order to operate, the 6 pins are used.The LED driving board has a total of 1 functions.With a supply voltage of 5V, high efficiency is possible.This LED driver is equipped with a total of 6 pins.It has a resistance of 100mOhm.It is set to 1.5A in this case.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.A total of 1 channels are available for you to choose from.This LED driver can handle voltages up to 6.5V volts.There is a minimum input voltage of 2.5V volts.
TPS2553DRVT-1 Features
Supplied from 5V
Resistance of 100mOhm
1 channels
TPS2553DRVT-1 Applications
There are a lot of Texas Instruments TPS2553DRVT-1 Power Switches ICs applications.
- USB3.1 Power Delivery
- Hot Swap
- Wireless Modem Data Cards
- USB Ports/Hubs
- Smartphone and PDA
- Storage Drives
- Wearable Devices
- Hard Disk Drives
- HDD and SSD
- Low Voltage I/O System Power
