TPS2557QDRBTQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Number of Pins | 8 |
| Weight | 24.012046mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2557 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 6.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~6.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, UVLO |
| Rds On (Typ) | 22m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2557QDRBTQ1 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included in the package 8-VDFN Exposed Pad.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has 1 outputs.A supply voltage of Not Required is required for it to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.It belongs to the family TPS2557.A total of 8 terminations can be found in it.The 8 pins are used for the operation of the system.The LED driver has 1 functions.High efficiency is possible at 5V supply voltage.As a result, it is mounted in the manner of Surface Mount.This electrical component can be found in the Automotive, AEC-Q100 series.When this is the case, the output current is set to 5A.The maximum supply voltage for this lighting driver is set to 6.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must remain above 2.5V.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.
TPS2557QDRBTQ1 Features
Supplied from 5V
1 channels
TPS2557QDRBTQ1 Applications
There are a lot of Texas Instruments TPS2557QDRBTQ1 Power Switches ICs applications.
- Smart Phones, Feature Phones
- USB3.1 Power Delivery
- Solid State Drivers
- Storage (HDDs, SSDs)
- USB Protection
- Various applications equipped with buttons
- Storage Drives
- Mobile Communication Devices
- Smartphone and PDA
- PC Cards
