TPS2818DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 437mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Base Part Number | TPS2818 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 15.5V |
| Max Output Current | 2A |
| Operating Supply Current | 50mA |
| Power Dissipation | 437mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | INVERTED |
| Rise / Fall Time (Typ) | 14ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 2A |
| Supply Voltage1-Nom | 10V |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2818DBVR Overview
For greater flexibility, the SC-74A, SOT-753 package is adopted.The packaging method is indicated by Tape & Reel (TR).In the direction of Surface Mount, gate drivers is mounted.A supply voltage of 4V~14V demonstrates its superiority.A gate type of N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TA.Inverting is used as its input type.There are 5 terminations to form the base of its configuration.Many related parts can be found under its base part number TPS2818.In this case, Surface Mount indicates how the device is mounted.There are 5 pins available in the device.Specification is for 10V supply voltage operation.Mosfet driver is equipped wMosfet driverh an interface chip BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 2A volts.There are several useful electronic components within its subcategory MOSFET Drivers.The board has 5 component pins.Based on its basis, it integrates 1 outputs.Mosfet gate drivers can deliver a current of 2A.Its maximum power dissipation of 437mW shows its power loss capacity without overheating.15.5V is the output voltage.With a supply voltage of 50mA, it operates.
TPS2818DBVR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 437mW
TPS2818DBVR Applications
There are a lot of Texas Instruments TPS2818DBVR gate drivers applications.
- Motor Control
- Solar power supplies
- High-speed communications
- Multicolor LED/laser displays
- AC-DC Inverters
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
- High power buffers
- 3-Phase Motor Inverter Driver
- Portable Navigation Devices
- Portable Media Players
