TPS28226DG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 7.2V |
| Frequency | 2MHz |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Operating Supply Voltage | 7.2V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 8V |
| Min Supply Voltage | 6.8V |
| Power Dissipation-Max | 1.25W |
| Element Configuration | Single |
| Power Dissipation | 1.25W |
| Current - Output | 6A |
| Rise Time | 10ns |
| Fall Time (Typ) | 10 ns |
| Turn-Off Delay Time | 14 ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| High Side Driver | YES |
| Height | 1.58mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS28226DG4 Overview
There is greater flexibility with the SOIC package.There is a package in the form of Rail/Tube.Its configuration starts with 8 terminations.Mounting the device requires Surface Mount.In the device, there are 8 pins.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 7.2V.Its interface IC is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 4A that can be achieved.There are several useful electronic components in this subcategory of MOSFET Drivers.A total of 8 pins are available for component connections.In terms of its basis, there are 2 outputs integrated.Temperatures greater than 125°C are not allowed.Mosfet gate drivers is permissible to operate at a temperature of -40°C.Its maximum operating voltage is 8V.Its minimum operating voltage is 6.8V.6A is the output current.During the operation of the system, the voltage of the operating supply should be set to 7.2V.A higher frequency of 2MHz will improve efficiency.
TPS28226DG4 Features
Embedded in the Rail/Tube package
8 pins
TPS28226DG4 Applications
There are a lot of Texas Instruments TPS28226DG4 gate drivers applications.
- Solar inverters
- RGB applications
- LCD/LCoS/DLP portable and embedded pico projectors
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Digitally controlled power supplies
- High-speed communications
- Isolated Gate Driver Supplies
- Isolated Supplies for Motor Control
- Telecom switch mode power supplies
- Welding
