TPS2829DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 437mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Base Part Number | TPS2829 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 15.5V |
| Max Output Current | 2A |
| Operating Supply Voltage | 10V |
| Nominal Supply Current | 100nA |
| Power Dissipation | 437mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Max Output Voltage | 9.9V |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 14ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2829DBVT Overview
There is greater flexibility with the SC-74A, SOT-753 package.Tape & Reel (TR) represents the package.Surface Mount is mounted in the way of the device.By using 4V~14V supply voltage, it is able to demonstrate its superiority.There is a gate type of N-Channel MOSFET in this design.This device is allowed to operate in a temperature range of -40°C~125°C TA.Non-Inverting is the input type used in this program.Initially, the configuration is composed of 5 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number TPS2829.You mount it with Surface Mount.When designing, the device is configured with 5 pins.Mosfet driver is designed specifically to run on 10V volts of power.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.The maximum output current can amount to 2A.Its subcategory of MOSFET Drivers contains various useful electronic components.A total of 5 pins are available for component connections.In terms of its basis, there are 1 outputs integrated.The output current can be set to 2A.437mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.In this case, it produces a voltage of 15.5V.The operating supply voltage should be set at 10V.A maximum voltage of 9.9V should be maintained for the output voltage.
TPS2829DBVT Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 437mW
TPS2829DBVT Applications
There are a lot of Texas Instruments TPS2829DBVT gate drivers applications.
- Telecom switch mode power supplies
- High frequency line drivers
- DC/DC converters
- serial peripheral interface (SPI), I2C
- Solar power supplies
- PCMCIA applications
- Topologies
- Welding
- Portable Media Players
- Multicolor LED/laser displays
