TPS2829DBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 437mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~14V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Base Part Number | TPS2829 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Max Output Current | 2A |
| Nominal Supply Current | 100nA |
| Power Dissipation | 437mW |
| Output Current | 2A |
| Propagation Delay | 50 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 50 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 35ns |
| Fall Time (Typ) | 35 ns |
| Output Polarity | TRUE |
| Rise / Fall Time (Typ) | 14ns 14ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Single |
| Output Peak Current Limit-Nom | 2A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 2A 2A |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1V 4V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2829DBVTG4 Overview
The SC-74A, SOT-753 package offers greater flexibility.Tape & Reel (TR) represents the package.There is a mounting bracket in the way of Surface Mount.In the absence of a 4V~14V supply voltage, its superiority can be demonstrated.The gate type on this device is N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TA.The input type for this program is Non-Inverting.The configuration starts with 5 terminations.There are various related parts under its base part number TPS2829.Mosfet driver is mounted using Surface Mount.Mosfet driver is configured wMosfet driverh 5 pins when designing.Mosfet driver is designed specifically to run on 10V volts of power.The interface IC is referred to as BUFFER OR INVERTER BASED MOSFET DRIVER.In the maximum case, the output current can be 2A volts.There are various useful electronic components in its subcategory MOSFET Drivers.The board has 5 component pins.For its basis, 1 outputs are integrated.The output current of this device can be set to 2A.Having the maximum power dissipation of 437mW indicates its maximum capacity to conduct power losses without overheating.
TPS2829DBVTG4 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
5 pins
Maximum power dissipation of 437mW
TPS2829DBVTG4 Applications
There are a lot of Texas Instruments TPS2829DBVTG4 gate drivers applications.
- Power factor correction (PFC) circuits
- DC-DC Converters
- Industrial Power Supplies
- High frequency line drivers
- Welding
- Commercial and agricultural vehicles (CAV)
- Dual-Battery Systems
- Broadcast equipment
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
