TPS2HB35AQPWPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Surface Mount | YES |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 13.5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | compliant |
| JESD-30 Code | R-PDSO-G16 |
| Operating Temperature (Max) | 125°C |
| Operating Temperature (Min) | -40°C |
| Supply Voltage-Max (Vsup) | 18V |
| Temperature Grade | AUTOMOTIVE |
| Supply Voltage-Min (Vsup) | 6V |
| Supply Current-Max | 2.7mA |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 2 |
| Screening Level | AEC-Q100 |
| Turn On Time | 145 µs |
| Output Peak Current Limit-Nom | 14A |
| Turn Off Time | 147 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
TPS2HB35AQPWPRQ1 Overview
It consists of 16 terminations in total.It is important to note that the LED driving board has 2 functions.It is possible to achieve a high level of efficiency with a supply voltage of 13.5V.This LED driver is configured to have a maximum supply voltage of 18V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 6V.Interface type BUFFER OR INVERTER BASED PERIPHERAL DRIVER is used for this LED driving board.
TPS2HB35AQPWPRQ1 Features
Supplied from 13.5V
TPS2HB35AQPWPRQ1 Applications
There are a lot of Texas Instruments TPS2HB35AQPWPRQ1 Power Switches ICs applications.
- Portable GPS Device
- Hot-Swap Systems
- Solid-State Drives
- Portable Devices
- PC Card Hot Swap
- USB Protection
- Mobile Communication Devices
- Set-top-box
- Gaming
- Hard Disk Drives
