banner_page

TPS3705-33DGN

3.3V8 Terminals 8-Pin TPS3705 Voltage supervisor1 Channels Min 2V Max 6V


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS3705-33DGN
  • Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
  • Datasheet: -
  • Stock: 817
  • Description: 3.3V8 Terminals 8-Pin TPS3705 Voltage supervisor1 Channels Min 2V Max 6V (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mounting Type Surface Mount
Package / Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Power Management Circuits
Max Power Dissipation 2.14W
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.65mm
Base Part Number TPS3705
Output Push-Pull, Totem Pole
Pin Count 8
Number of Elements 2
Number of Channels 1
Max Supply Voltage 6V
Min Supply Voltage 2V
Operating Supply Current 30μA
Nominal Supply Current 50μA
Power Dissipation 2.14W
Max Supply Current 50μA
Adjustable Threshold NO
Quiescent Current 30μA
Watchdog Timer Yes
Reset Active Low
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Threshold Voltage +2.93V
Undervoltage Threshold 2.93V
Overvoltage Threshold 3V
Height 1.1mm
Length 3mm
Width 3mm
Thickness 1.02mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS3705-33DGN Overview


There are 8 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tube model. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 3.3V volt supply. In a 1 supply voltage, the PMIC chip conducts. The power management system can be categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. 8 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2V. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 30μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to TPS3705, which is the base power ics number. A maximum supply temperature of 50μA can be used with this power management. There are 2 elements to this supervisor, which can be used in a variety of applications.

TPS3705-33DGN Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
30μA operating supply current

TPS3705-33DGN Applications


There are a lot of Texas Instruments TPS3705-33DGN Voltage Supervisors applications.

  • Display equipment
  • Power distribution systems of CCU
  • External alarm
  • Battery cars
  • Radio
  • Detection of phase imbalance
  • Satellite navigation
  • DSP
  • Functional modules
  • Smart meter

Write a review

Note: HTML is not translated!
    Bad           Good