TPS3813L30DBVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 437mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TPS3813L30 |
| Output | Open Drain or Open Collector |
| Pin Count | 6 |
| Max Output Current | 5mA |
| Operating Supply Voltage | 3V |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 9μA |
| Nominal Supply Current | 25μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Adjustable Threshold | NO |
| Quiescent Current | 9μA |
| Watchdog Timer | Yes |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 20ms Minimum |
| Min Reset Threshold Voltage | 2.58V |
| Max Reset Threshold Voltage | 2.7V |
| Threshold Voltage | 2.64 |
| Undervoltage Threshold | 2.64V |
| Overvoltage Threshold | 2.7V |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3813L30DBVT Overview
Power management is mounted through 6 terminals. Power management is packaged in a Cut Tape (CT) way. As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. There are SOT-23-6 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The package peak reflow temperature is specified to be 260. Manage ics operate at 3V supply voltages. Power ics operate at 1 supply voltages. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 6 pins on the board. Power managment ic pin count is 6. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 2V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 6V volts. The recommended mounting type is Surface Mount. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a supply current of 9μA for the power management. For similar manage ics search of the manufacturer, you can always refer to TPS3813L30, the base PMIC number. Voltage supervisor can work with a supply temperature of 25μA at the most.
TPS3813L30DBVT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
9μA operating supply current
TPS3813L30DBVT Applications
There are a lot of Texas Instruments TPS3813L30DBVT Voltage Supervisors applications.
- Important electronics for automotive safety
- Functional modules
- Analog circuit
- Microprocessor system
- Unattended substation automation
- Battery-powered equipment
- DVR
- Power distribution systems of ICU
- Electrical fire monitoring system
- Medical-specific isolation transformer
