TPS3839G33DQNT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 10 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-XDFN Exposed Pad |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.93V |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS3839G33 |
| Output | Push-Pull, Totem Pole |
| Number of Channels | 1 |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 600mV |
| Operating Supply Current | 150nA |
| Max Supply Current | 500nA |
| Adjustable Threshold | NO |
| Quiescent Current | 150nA |
| Reset | Active Low |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 120ms Minimum |
| Min Reset Threshold Voltage | 3.003V |
| Max Reset Threshold Voltage | 3.126V |
| Threshold Voltage | +3.08V |
| Undervoltage Threshold | 3.08V |
| Height | 400μm |
| Length | 1mm |
| Width | 1mm |
| Thickness | 370μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS3839G33DQNT Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find 4-XDFN Exposed Pad functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by a Surface Mount-axis. The power management belongs to the Power Management Circuits subcategory. This power management has 4 pins. IC management can only work with a supply voltage of 600mV volts. There should be no more than 6.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. For this power management, there is an 150nA volt supply current. There are also other features in the software such as [0], just to mention a few. For similar manage ics search of the manufacturer, you can always refer to TPS3839G33, the base PMIC number. At the most, voltage supervisor can work with a supply temperature of 500nA.
TPS3839G33DQNT Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 600mV
150nA operating supply current
TPS3839G33DQNT Applications
There are a lot of Texas Instruments TPS3839G33DQNT Voltage Supervisors applications.
- Functional modules
- Network equipment
- Computer applications
- Leakage current detection
- Personal computers
- emergency room
- Medical-specific isolation transformer
- Power distribution systems of operating room
- Telecommunications equipment
- Unattended substation automation
