TPS40050QPWPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.312252mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS40050 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 32.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200μA |
| Voltage - Supply (Vcc/Vdd) | 8V~40V |
| Quiescent Current | 1.5mA |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Duty Cycle (Max) | 94% |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40050QPWPRQ1 Overview
It comes in a 16-PowerTSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC packaging is solid with a Cut Tape (CT) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc controls with 8V~40V voltage are supplied and operated. Qualified to work in an dc switcher with -40°C~125°C TJ. The switching controller can be switched at Up to 1MHz. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Soft Start which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. The 16 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's input voltageis 24V volts. Searching "TPS40050" will return other relevant dc to dc converter ics. In total, switching converter has 16 pins. It is recommended that the input voltage of the dc dc voltage regulator be 8V. DC regulator outputs 32.5V voltage according to the test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200μA. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. 1MHz is the maximum frequency of this dc regulators. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 40V. A dc to dc voltage regulator in the Automotive, AEC-Q100 series, it belongs to this family. DC switchings that are dormant use 1.5mA.
TPS40050QPWPRQ1 Features
Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
TPS40050QPWPRQ1 Applications
There are a lot of Texas Instruments TPS40050QPWPRQ1 DC to DC converter applications.
- Domestic water pumps
- Network technology
- Remotely powered electric motors
- Industrial controllers
- Energy management systems
- Textile machinery
- Nuclear power plants
- Experimental setup
- Printing equipment
- Plate bending machines
