TPS43336QDAPRQ1
| Parameters | |
|---|---|
| Package / Case | 38-PowerTSSOP (0.240, 6.10mm Width) |
| Number of Pins | 38 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO HAS A CONTROL TECHNIQUE OF PFM; OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 11V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS43336 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4V~40V |
| Quiescent Current | 30μA |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck, Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz~600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 600kHz |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 90%, 98.75% |
| Output Phases | 2 |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
TPS43336QDAPRQ1 Overview
It comes in the 38-PowerTSSOP (0.240, 6.10mm Width) package, which makes switching controller suitable for most applications. 3 outputs can be generated with the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4V~40V. Suitable for a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 150kHz~600kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Power Good, Soft Start, Tracking. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . The 38 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 13V is input. You can find other relevant dc to dc converter ics by searching "TPS43336". Total pins of switching converter are 38. Switching converter is a special type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4V. Statistically, DC regulator outputs 5V volts. normally, the dc dc regulator's output current is 3A, which you should keep in mind when starting a project. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is a maximum frequency of 600kHz for this dc regulators. This value is ALSO HAS A CONTROL TECHNIQUE OF PFM; OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 11V so that DC to DC voltage regulator better serves the purpose. When running the voltage regulator dc to dc in a circuit, users should apply 40V to ensure safety and reliability. A dc to dc voltage regulator in the Automotive, AEC-Q100 series, it belongs to this family. DC switching uses 30μA when it is dormant.
TPS43336QDAPRQ1 Features
Transistor Driver Outputs
Switching Frequency: 150kHz~600kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
ALSO HAS A CONTROL TECHNIQUE OF PFM; OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 11V
TPS43336QDAPRQ1 Applications
There are a lot of Texas Instruments TPS43336QDAPRQ1 DC to DC converter applications.
- Game consoles
- ATMs
- Industrial robots
- Elevator lighting
- Wind power
- Printing equipment
- Photovoltaic power
- Pipe bending machines
- Digital display device
- Various precision measuring detectors
