TPS54620RGYR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 32.205058mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | SWIFT™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS54620 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 15V |
| Output Type | Adjustable |
| Max Output Current | 6A |
| Operating Supply Voltage | 17V |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 600μA |
| Max Output Voltage | 15V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~1.6MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Voltage - Output (Max) | 15V |
| Height | 1mm |
| Length | 3.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS54620RGYR Description
The TPS54620RGYR is a synchronous Step-down Converter optimized for small designs through high efficiency and integrating the high-side and low-side MOSFETs. More space is saved by using current-mode control, which decreases component count, and by selecting a high switching frequency, which minimizes the inductor's footprint. The SS/TR pin controls the output voltage startup ramp, allowing it to operate as a stand-alone power supply or in tracking circumstances. Power sequencing is also feasible by configuring the enable and open drain power good pins correctly. The high-side FET's cycle-by-cycle current limiting safeguards the device in overload circumstances and is supplemented by a low-side source current limit that prevents current runaway. A low-side sinking current limit is also present, which disables the low-side MOSFET to prevent excessive reverse current. When the die temperature exceeds the thermal shutdown temperature, the part is disabled.
TPS54620RGYR Features
0.8V ±1% Voltage reference over temperature
Synchronizes to external clock
Monotonic start-up into pre-biased outputs
Adjustable input undervoltage lockout
Supported by SwitcherPro? software tool
Integrated 26/19mR MOSFETs
2μA Low shutdown quiescent current
Green product and no Sb/Br
Adjustable slow start/power sequencing
Power good output monitor for undervoltage and overvoltage
TPS54620RGYR Applications
High Density Distributed Power Systems
High Performance Point of Load Regulation
Broadband
Networking
Optical Communications Infrastructure
The TPS54620RGYR is a synchronous Step-down Converter optimized for small designs through high efficiency and integrating the high-side and low-side MOSFETs. More space is saved by using current-mode control, which decreases component count, and by selecting a high switching frequency, which minimizes the inductor's footprint. The SS/TR pin controls the output voltage startup ramp, allowing it to operate as a stand-alone power supply or in tracking circumstances. Power sequencing is also feasible by configuring the enable and open drain power good pins correctly. The high-side FET's cycle-by-cycle current limiting safeguards the device in overload circumstances and is supplemented by a low-side source current limit that prevents current runaway. A low-side sinking current limit is also present, which disables the low-side MOSFET to prevent excessive reverse current. When the die temperature exceeds the thermal shutdown temperature, the part is disabled.
TPS54620RGYR Features
0.8V ±1% Voltage reference over temperature
Synchronizes to external clock
Monotonic start-up into pre-biased outputs
Adjustable input undervoltage lockout
Supported by SwitcherPro? software tool
Integrated 26/19mR MOSFETs
2μA Low shutdown quiescent current
Green product and no Sb/Br
Adjustable slow start/power sequencing
Power good output monitor for undervoltage and overvoltage
TPS54620RGYR Applications
High Density Distributed Power Systems
High Performance Point of Load Regulation
Broadband
Networking
Optical Communications Infrastructure
