TPS60251RTWT
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 2.646W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS60251 |
| Pin Count | 24 |
| Number of Outputs | 7 |
| Max Output Current | 230mA |
| Input Voltage-Nom | 3.5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 6.7mA |
| Power Dissipation | 1.058W |
| Output Current | 230mA |
| Max Supply Current | 6.7mA |
| Quiescent Current | 68μA |
| Voltage - Output | 6.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 3V |
| Max Input Voltage | 6V |
| Internal Switch(s) | Yes |
| High Level Output Current | 230mA |
| Dimming | I2C |
| Number of Segments | 14 |
| Switching Frequency | 750kHz |
| Touchscreen | Capacitive |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS60251RTWT Overview
There is also a 24-WFQFN Exposed Pad package that is used to save space on the board. For the design of this LED driver, 7 outputs are used.The mounting method is Surface Mount.There is no doubt that this is a very efficient and reliable DC DC Regulator.-40°C~85°C TA is the operating temperature of the led driver.There are significant benefits for Backlight.It operates with 24 terminations.To form its configuration, there are 24 pins.It is estimated that there are 14 segments.A base part number of TPS60251 is associated with this LED driver.6V is an acceptable maximum value for the supply voltage.It has a voltage output of 6.5V.The device has 24 pins.This device requires a minimum input voltage of 3V.As a result, it is designed to operate at a minimal voltage of 3V to ensure the most efficiency possible.It reaches 6V when the maximum supply current is allowed.If the maximum current supply is less than 6.7mA, this device provides high efficiency.The load is capable of receiving 230mA current.This electronic component can fully perform its functions when the switching frequency is kept at 750kHz.A LED driver that operates at 230mA output current provides all the benefits of a LED driver.In the absence of external factors, 68μA current is consumed.There are 3.5V volts assigned to the circuit when operating the device.
TPS60251RTWT Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Switching frequency of 750kHz
TPS60251RTWT Applications
There are a lot of Texas Instruments TPS60251RTWT LED Driver ICs applications.
- General lighting
- LED Lightings for Inspection Devices
- Amusement Machines
- Sports Facility Lighting
- Other Electronic Devices
- Gallery lighting
- LED headlights
- OLED power supply for portable equipment
- Dimmable LED for vehicle interiors
- Constant Voltage Power Source for portable equipment
