TPS61221DCKT
| Parameters | |
|---|---|
| Weight | 28.009329mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 2MHz |
| Base Part Number | TPS61221 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Max Output Current | 400mA |
| Voltage - Input (Min) | 0.7V |
| Input Voltage-Nom | 1.2V |
| Min Supply Voltage | 700mV |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 200mA Switch |
| Quiescent Current | 5μA |
| Max Output Voltage | 3.3V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 2MHz |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 3.3V |
| Nominal Output Voltage | 3.3V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 6 |
TPS61221DCKT Overview
Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. This harley voltage regulator has 6 terminations. As a matter of fact, the type of analog IC that this voltage regulator 12v is equipped with is called BATTERY CHARGE CONTROLLER. The space-saving 6-TSSOP, SC-88, SOT-363 package is available for this voltage regulator. In this case, DC DC switching regulator has 1 outputs configured to it. The adjusting voltage regulator generates Fixed output. This switching regulator is designed to fit the Surface Mount mounting system. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~125°C TJ. This DC-DC switching regulator has a switching frequency of Up to 2MHz. The voltage regulator can operate with a dc to dc voltage regulator's minimum input voltage of 0.7V. It features maximum design flexibility due to dc to dc voltage regulator's 200mA Switch output current. Voltage regulator has a maximum input voltage of 5.5V. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 1.2V. TPS61221 is a family of voltage regulators that belong to the DC/DC industry. The voltage DC DC switching regulator can provide is up to 3.3V volts. 6 pins are used for switching regulator operation. There should be at least a 3.3V volt output voltage for this switching regulator in order to make it work properly. A maximum output current of 400mA A is available to meet the switching regulator operation requirements. With a maximum output voltage of 3.3V, DC DC switching regulator has a very high efficiency. Without external influences, harley voltage regulator consumes 5μAA of quiescent current. The 700mV V dc to dc voltage regulator's minimum supply voltage ensures reliable performance. A frequency of 2MHz enables dc to dc voltage regulator to maintain high accuracy.
TPS61221DCKT Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
TPS61221DCKT Applications
There are a lot of Texas Instruments TPS61221DCKT Voltage Regulators applications.
- Computer rooms
- Servo drive system
- Analog precision reference circuits
- Linear guide
- Window air conditioners
- Grinders
- Power supplies of electronic gadgets
- Mobile phones
- Domestic water pumps
- Production lines
