TPS61301YFFT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.4mm |
| Frequency | 1.92MHz |
| Base Part Number | TPS61301 |
| Pin Count | 20 |
| Number of Outputs | 3 |
| Max Output Current | 1.25A |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Output Current | 1.5A |
| Max Supply Current | 700μA |
| Quiescent Current | 590μA |
| Voltage - Output | 5.7V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 400mA 800mA Flash |
| Internal Switch(s) | Yes |
| High Level Output Current | 8mA |
| Low Level Output Current | 8mA |
| Dimming | I2C |
| Number of Segments | 2 |
| Multiplexed Display Capability | NO |
| Height | 625μm |
| Length | 0m |
| Width | 0m |
| Thickness | 400μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61301YFFT Overview
Additionally, there is a 20-UFBGA, DSBGA package for saving space.There are 3 outputs used for the design of this LED drivers.As far as mounting is concerned, Surface Mount is adopted.As a DC DC Regulator, it has high efficiency and reliability.It is capable of operating at a temperature of -40°C~85°C TA. There are many benefits for Camera Flash.On the basis of the frequency 1.92MHz, it operates.It operates using 20 terminations.The configuration of the board is built around 20 pins.It is estimated that there are 2 segments.The base part number for this LED driver is TPS61301.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.The output voltage of the device is 5.7V.20 pins are included in it.As a result, it can also be classified as Display Drivers.At a voltage of 2.5V, it operates at a minimal input voltage.To meet high efficiency standards, it works with a voltage of 2.5V.Supply current cannot exceed 5.5V.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 700μA.In this case, the load can only be supplied with 1.5A current.LED drivers can deliver all benefits of 1.25A due to their maximum output current.The consumption of current is 590μAin the absence of external factors.
TPS61301YFFT Features
Available in the 20-UFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 1.92MHz
Supply voltage of 3.6V
TPS61301YFFT Applications
There are a lot of Texas Instruments TPS61301YFFT LED Driver ICs applications.
- Replacement lamps
- LED headlights
- LED backlight driver for LCD displays for Tablets and Note PCs
- Museum lighting
- Amusement Machines
- General lighting
- Down lights
- Architectural lighting
- OLED power supply for portable equipment
- LED Lightings for Inspection Devices
