Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 3 days ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
10-VFDFN Exposed Pad |
Surface Mount |
YES |
Number of Pins |
10 |
Weight |
26.109911mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
10 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.5mm |
Frequency |
2.25MHz |
Base Part Number |
TPS62410 |
Function |
Step-Down |
Number of Outputs |
2 |
Efficiency |
95 % |
Output Voltage |
6V |
Output Type |
Adjustable |
Max Output Current |
800mA |
Voltage - Output 1 |
6V |
Input Voltage-Nom |
3.6V |
Max Supply Voltage |
6V |
Min Supply Voltage |
2.5V |
Analog IC - Other Type |
DUAL SWITCHING CONTROLLER |
Nominal Supply Current |
32μA |
Output Configuration |
Positive |
Quiescent Current |
32μA |
Max Output Voltage |
6V |
Voltage - Output 2 |
6V |
Voltage - Output (Min/Fixed) |
0.6V |
Topology |
Buck |
Control Mode |
VOLTAGE-MODE |
Control Technique |
PULSE WIDTH MODULATION |
Current - Output 1 |
800mA |
Synchronous Rectifier |
Yes |
Min Output Voltage |
600mV |
Switcher Configuration |
PHASE-SHIFT |
Current - Output 2 |
800mA |
Height |
1mm |
Length |
3mm |
Width |
3mm |
Thickness |
900μm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS62410DRCT Overview
Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. In this voltage regulator, 10 terminations are present. There is a DUAL SWITCHING CONTROLLER type analog IC in this voltage regulator 12v that is used to convey analog signals. Space savings are achieved by placing this voltage regulator in the 10-VFDFN Exposed Pad package. There are 2 outputs configured on the voltage regulator. This DC DC switching regulator generates Adjustable output on its output pins. Surface Mount-mounting is compatible with this switching regulator. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.6V. Its 260 peak reflow temperature makes this regulator essentially indestructible. For operation, voltage regulator provides a nominal input voltage of 3.6V. DC/DC regulators such as this one belong to the TPS62410 family of products. A voltage of 6V volts can be generated by DC DC switching regulator. In order to operate voltage regulator, there are 10 pins that must be connected. In order for this switching regulator to work properly, the output voltage should be at least 600mVV. A maximum output current of 800mA A is available to meet the switching regulator operation requirements. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 6V, which is the highest available. Despite external influences, voltage regulator consumes 32μA A of quiescent current. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 2.5V V. DC DC switching regulator can be operated from a voltage of 6V as its maximum supply voltage. When the frequency is 2.25MHz, DC DC switching regulator can maintain high accuracy.
TPS62410DRCT Features
2 outputs
Peak reflow temperature (Cel) of 260
10 pins
TPS62410DRCT Applications
There are a lot of Texas Instruments TPS62410DRCT Voltage Regulators applications.
- Milling machines
- Lathes
- Energy management systems
- Digital video recorders
- Series voltage regulation circuits
- Motor controller circuits
- Injection molding machinery
- Balance equipment
- Digital display device
- Die casting equipment