TS512AIDT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | TS512 |
| Pin Count | 8 |
| Operating Supply Voltage | 15V |
| Number of Elements | 2 |
| Operating Supply Current | 500μA |
| Nominal Supply Current | 1.2mA |
| Output Current | 23mA |
| Slew Rate | 1.5V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 50nA |
| Voltage - Supply, Single/Dual (±) | 6V~30V ±3V~15V |
| Output Current per Channel | 23mA |
| Input Offset Voltage (Vos) | 500μV |
| Gain Bandwidth Product | 3MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 3000 kHz |
| Voltage Gain | 95dB |
| Average Bias Current-Max (IIB) | 0.3μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Programmable Power | NO |
| Wideband | NO |
| Power | NO |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS512AIDT Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. Buffer amps of this type are called General Purpose-types. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. The number of terminations approaches 8. A total of 8 pins are attached to buffer op amp. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In more specific terms, this linear amplifier can be categoriOperational Amplifiered as a Operational Amplifier-type device. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. Surface Mount is the recommended mounting type for this linear amplifier. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . A supply current of 500μA can be used to operate this linear amplifier. It is recommended to keep the voltage gain at 95dB at all times. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 15V. This linear amplifier pack is based on the TAPE AND REEL axis.
TS512AIDT Features
8 Pins
supply voltage of 15V
95dB voltage gain
TS512AIDT Applications
There are a lot of STMicroelectronics TS512AIDT Instrumentational OP Amps applications.
- Proportional operation circuits
- High-frequency data acquisition systems
- Switching amplifier
- Video computer boards
- High speed sample
- Non-polarized electrodes
- Wireless base stations
- High/low-pass filter circuit
- Large motor controllers
- Comparator
