TS5A3159DBVRE4

35ns, 20ns SPDT 1.1Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3159 6 Pins 2nA 1.8V SOT-23-6

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3159DBVRE4
Package: SOT-23-6
Datasheet: -
Stock: 871
Description: 35ns, 20ns SPDT 1.1Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3159 6 Pins 2nA 1.8V SOT-23-6(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Number of Pins	6
Weight	6.492041mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Termination	SMD/SMT
Resistance	1.1Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.95mm
Base Part Number	TS5A3159
Pin Count	6
Number of Outputs	2
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	100nA
Max Supply Current	100nA
Turn On Delay Time	35 ns
Number of Inputs	1
Supply Type	Single
Bandwidth	100MHz
Turn-Off Delay Time	20 ns
On-State Resistance (Max)	1.1Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	63 dB
Current - Leakage (IS(off)) (Max)	2nA
Channel Capacitance (CS(off), CD(off))	23pF
On-state Resistance Match-Nom	0.7Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	35ns, 20ns
Charge Injection	36pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-65dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	95ns
Switch-off Time-Max	70ns
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	1.45mm
Length	2.9mm
Width	1.6mm
Thickness	1.2mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A3159DBVRE4 Overview

Presented in SOT-23-6, this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Operation at a temperature around -40°C~85°C TA. In total, 6 terminations have occurred. A 1 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 1.8V voltage supply. A key feature of the 6 series is the inclusion of this electronic part as part of its design. Based on SPDT switching circuits, these analog multiplexers work. Try searching with TS5A3159 to find analog multiplexer variants. Analog switches have 1.1Ohm internal resistance. To find out what the functions of 6 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. A cost-effective Single supply type analogue multiplexer. There should be 1.65V voltage fed to the electrical part below 1.65V. The switch device would be able to operate with 100nA current. An analogue multiplexer drains from a single voltage supply at 1.65V~5.5V. The analogue multiplexer may be damaged if voltage is greater than 100nA. Operating the 1 inputs requires 1 inputs. It is possible to transfer data over a 100MHz-bandwidth. Multiplexer ics with 2 outputs are available.