TS5A3166QDCKRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Weight | 2.494758mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 900mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Base Part Number | TS5A3166 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Max Supply Current | 100nA |
| Turn On Delay Time | 7 ns |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 11.5 ns |
| On-State Resistance (Max) | 900mOhm |
| High Level Output Current | 200mA |
| Low Level Output Current | 200mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 80nA |
| Channel Capacitance (CS(off), CD(off)) | 19pF 18pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 7ns, 11.5ns |
| Charge Injection | 1pC |
| Switch-on Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 1.1mm |
| Length | 2mm |
| Width | 1.25mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TS5A3166QDCKRQ1 Overview
Due to its 5-TSSOP, SC-70-5, SOT-353 packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. There are 5 terminations totally. A 1 channel electronic part produces high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. These analog multiplexers are built based on SPST - NO switching circuits. A 1 circuit is present in this switch device. Search with TS5A3166 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 900mOhm. To find out what the functions of 5 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. 1.65V is the lowest voltage that should be fed to the electronic electronic part. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. Putting voltage greater than 100nA on the multiplexer may cause damage. 200MHz bandwidths enable data to be transferred. The series starts with Automotive, AEC-Q100.
TS5A3166QDCKRQ1 Features
1 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
TS5A3166QDCKRQ1 Applications
There are a lot of Texas Instruments TS5A3166QDCKRQ1 Analog Switches & Multiplexers ICs applications.
- Imaging
- Remote wireless modules
- Routers
- PCMCIA cards
- SDH/SONET multiplexers
- CSU
- PDAs
- High-Voltage
- Battery-powered systems
- Cross Connects
