TS5A3357DCUR

6.5ns, 3.7ns SP3T 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3357 8 Pins 100nA 1.8V 8-VFSOP (0.091, 2.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-TS5A3357DCUR
Package: 8-VFSOP (0.091, 2.30mm Width)
Datasheet: -
Stock: 422
Description: 6.5ns, 3.7ns SP3T 15Ohm DUAL Analog Switches BREAK-BEFORE-MAKE TS5A3357 8 Pins 100nA 1.8V 8-VFSOP (0.091, 2.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-VFSOP (0.091, 2.30mm Width)
Number of Pins	8
Weight	9.610488mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	7Ohm
Subcategory	Multiplexer or Switches
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	1.8V
Terminal Pitch	0.5mm
Base Part Number	TS5A3357
Pin Count	8
Number of Outputs	3
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.65V
Operating Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	3PST
Turn On Delay Time	6.5 ns
Supply Type	Single
Bandwidth	334MHz
Turn-Off Delay Time	3.7 ns
On-State Resistance (Max)	15Ohm
High Level Output Current	100mA
Low Level Output Current	100mA
Multiplexer/Demultiplexer Circuit	3:1
Off-state Isolation-Nom	81 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	4.5pF 10.5pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SP3T
Switch Time (Ton, Toff) (Max)	6.5ns, 3.7ns
Charge Injection	3.4pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-62dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.65V~5.5V
Height	900μm
Length	2.3mm
Width	2mm
Thickness	850μm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TS5A3357DCUR Overview

Packed in 8-VFSOP (0.091, 2.30mm Width), the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a ratio of 3:1. The operating temperature is extended to around -40°C~85°C TA. There are 8 terminations totally. This electronic part offers high-quality output due to its 1 channels. With a 1.8V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 8 pins. Circuits based on SP3T switching are used to construct these analog switch ics. Look for analog switch ic variants by searching with TS5A3357. As far as internal resistance is concerned, it has 7Ohm. You can find the functions of the 8 pins in the datasheets. This switch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Single supply type digital switch with a low cost. 1.65V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 1μA current. A voltage of 1.65V~5.5V is required to drain this analog switch from a single voltage supply. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. 334MHz-bandwidths can be used to transfer data between multiplexers. The analog switch ics includes 3 outputs.