TXS0108EPWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Other Interface ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TXS0108 |
| Pin Count | 20 |
| Output Type | Open Drain, Push-Pull |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Nominal Supply Current | 8μA |
| Output Current | 620μA |
| Number of Bits | 8 |
| Propagation Delay | 4.8 ns |
| Quiescent Current | 3μA |
| Turn On Delay Time | 312 ns |
| Logic Function | Translator |
| Data Rate | 60Mbps |
| Output Characteristics | 3-STATE |
| Rise Time | 6.3ns |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -50mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 50mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~3.6V |
| Voltage - VCCB | 1.65V~5.5V |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TXS0108EPWR Overview
20-TSSOP (0.173, 4.40mm Width) contains it.A Tape & Reel (TR) package is used to package it.In this configuration, the output is set to Open Drain, Push-Pull.The translator type of this electrical device is Voltage Level.Surface Mount is used to mount this electronic part.There is Bidirectional channel type for this electrical device.-40°C~85°C TA is the operating temperature.The superior flexibility of the system is achieved through its use of 1 circuits.As part of the transmission line termination process, there are a total of 20 terminations.Parts related to a base part number TXS0108 are designated by the same number.A supply voltage of 2.5V is used to power the device.20 pins are present on this board.20 pins are used in its design.There are 8 bits in this electronic part.Voltages up to 5.5V can be supplied.This device requires a minimum voltage of 1.2V.The VCCA supply rail is configured from 1.2V~3.6V.VCCB is configured with a supply rail that starts at 1.65V~5.5V.Level translators has been mounted wLevel translatorsh the method of Surface Mount.Level translators is 8 channels.As part of Other Interface ICs, this part is included.In the absence of external influences, it consumes 3μA of quiescent current.During operation, Auto-Direction Sensing can be ensured.Featuring a 620μA output current, its design flexibility is maximized.
TXS0108EPWR Features
20-TSSOP (0.173, 4.40mm Width) package
1 circuits
20 pin count
20 pins
TXS0108EPWR Applications
There are a lot of Texas Instruments TXS0108EPWR voltage translators & level shifters applications.
- Personal Electronics
- LCD Panels Using GIP / GOA / ASG Technology
- Automotive
- One Assembly and Test Site
- Telecommunications
- Signaling Level Conversion for Clock or Data
- Industrial
- Telecom
- Available in Military (-55°C to 125°C)
- Routers (Telecom Switching Equipment)
