UC3526DW
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 400kHz |
| Base Part Number | UC3526 |
| Function | Step-Up, Step-Down, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Power Dissipation | 1W |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8V~35V |
| Quiescent Current | 14mA |
| Control Features | Enable, Frequency Control, Reset, Soft Start |
| Topology | Buck, Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1Hz~400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 300ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 100 ns |
| Nominal Input Voltage | 15V |
| Max Duty Cycle | 50 % |
| Duty Cycle (Max) | 49% |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 11.5mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 18-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
UC3526DW Overview
It comes in a 18-SOIC (0.295, 7.50mm Width) package, so switching controller can be used for most applications. dc motor controller is suitable for 2 output generation. Packaged in solid enclosures, this pmic has a Tube rating. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 8V~35V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. This switching controller can switch at 1Hz~400kHz. A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Enable, Frequency Control, Reset, Soft Start which allows efficient switching control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . The 18 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. Search for "UC3526" to find other relevant dc to dc converter ics. Switching converter has a total of 18 pins. Switching converter type is specifically Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 5V voltage. In most cases, the output current of the dc dc regulator will be 100mA, so note that when you start the project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 50 %. There is 400kHz frequency setting on the switching controller. As long as the dc switching is in a dormant state, it utilizes 14mA. A nominal working status is achieved when the input voltage is set to 15V.
UC3526DW Features
Transistor Driver Outputs
Switching Frequency: 1Hz~400kHz
Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 400kHz
UC3526DW Applications
There are a lot of Texas Instruments UC3526DW DC to DC converter applications.
- Smoke exhaust equipment
- Industrial controllers
- Elevator lighting
- Electric heating, lighting
- Drilling machines
- CMM
- CNC system
- Telecommunications equipment
- Plate bending machines
- USB circuits
