UC3825ADWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 473.692182mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO BE CONFIGURED IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UC3825 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 2V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 8.4V~22V |
| Control Features | Current Limit, Frequency Control, Ramp, Soft Start |
| Input Voltage (Min) | 8.8V |
| Topology | Boost, Flyback, Forward Converter, Full-Bridge, Half-Bridge, Push-Pull |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 400kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 20ns |
| Supply Current-Max (Isup) | 36mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Max Duty Cycle | 50 % |
| Output Phases | 1 |
| Height | 2.65mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UC3825ADWG4 Overview
Capsuled in the 16-SOIC (0.295, 7.50mm Width) package, the switching controller suits most application needs. For outputs of 2, this dc motor controller is suitable. An enclosure of Tube is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control has a supply voltage and operating voltage of 8.4V~22V. Suitable for working in an dc switcher that has a 0°C~70°C TA. The switching controller is capable of switching at the 400kHz~1MHz position. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Frequency Control, Ramp, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 16 terminations with various dc switching's functions. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. UC3825 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 16 pins. In particular, switching converter belongs to the Switching Regulator or Controllers family. 8.8V should be the minimum input voltage for the dc dc voltage regulator. DC regulator outputs 2V voltage based on test statistics. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. A duty cycle set at 50 % ensures voltage regulator dc to dc reliability during power-on and power-off. Switching controller operates at 1MHz Hz. Hence, CAN ALSO BE CONFIGURED IN CURRENT MODE is used to better suit the DC to DC voltage regulator's situation. The supply voltage should be 12V. Current supplied to the controller should not exceed 36mA.
UC3825ADWG4 Features
Transistor Driver Outputs
Switching Frequency: 400kHz~1MHz
Current Limit, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE
UC3825ADWG4 Applications
There are a lot of Texas Instruments UC3825ADWG4 DC to DC converter applications.
- Smoke prevention equipment
- Terrestrial set-top boxes
- Nuclear power plants
- Serial communication converter
- Die casting equipment
- Computer application technology
- Large fire protection systems
- Elevator lighting
- Pipe bending machines
- Computer monitoring equipment of building
