UCC2580DTR-3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 12V |
| Frequency | 1MHz |
| Base Part Number | UCC2580 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 400mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive or Negative |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.5V~16V |
| Control Features | Enable, Ramp, Soft Start |
| Topology | Forward Converter |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 400kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 40ns |
| Supply Current-Max (Isup) | 3.5mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 20 ns |
| Switcher Configuration | BOOST |
| Max Duty Cycle | 69 % |
| Duty Cycle (Max) | 66% |
| Output Phases | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2580DTR-3 Overview
With its 16-SOIC (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. For outputs of 2, this dc motor controller is suitable. A solid enclosure of Tape & Reel (TR) surrounds pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). Voltages 8.5V~16V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~85°C TA dc switcher. This switching controller can switch at 400kHz. dc dc regulator is made easier with Surface Mount. Enable, Ramp, Soft Start is used for efficient switching control in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. The switching converters's terminal (s) are designed at DUAL . There are many different types of terminations for 16. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "UCC2580". 16 pins are on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, the DC regulator outputs 400mV voltage. If you start a project, note down the dc dc regulator's usual output current of 100mA. voltage regulator dc to dcs with a 69 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. A frequency of 1MHz is used by the switching controller. Switching controller is necessary to supply a voltage of 12V. It is not recommended to supply more current to the controller than 3.5mA.
UCC2580DTR-3 Features
Transistor Driver Outputs
Switching Frequency: 400kHz
Enable, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %
Frequency: 1MHz
UCC2580DTR-3 Applications
There are a lot of Texas Instruments UCC2580DTR-3 DC to DC converter applications.
- Hydrogen power
- Product burn-in
- Current source circuits
- Various precision measuring instruments
- Industrial robots
- Scientific testing
- Electric water heaters
- Special machining machine tools
- Packaging
- Grinders
