UCC27425DRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 650mW |
| Technology | BICMOS |
| Voltage - Supply | 4V~15V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 14V |
| Base Part Number | UCC27425 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Power Supplies | 4.5/15V |
| Nominal Supply Current | 1.6mA |
| Power Dissipation | 650mW |
| Output Current | 4A |
| Max Supply Current | 1.6mA |
| Propagation Delay | 150 ns |
| Input Type | Inverting, Non-Inverting |
| Turn On Delay Time | 150 ns |
| Output Characteristics | TOTEM-POLE |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Output Polarity | TRUE AND INVERTED |
| Rise / Fall Time (Typ) | 20ns 15ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Turn On Time | 0.04 µs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Low-Side |
| Gate Type | N-Channel, P-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 4A 4A |
| High Side Driver | NO |
| Logic Voltage - VIL, VIH | 1V 2V |
| Turn Off Time | 0.05 µs |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC27425DRG4 Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.Tape & Reel (TR) represents the package.It's mounted on the way to Surface Mount.Using a 4V~15V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.There is a gate type of N-Channel, P-Channel MOSFET in this design.This device is allowed to operate in a temperature range of -40°C~125°C TA.Mosfet driver accepts input of type Inverting, Non-Inverting.The configuration starts with 8 terminations.Mosfet driver is possible to find various related parts under Mosfet drivers base part number UCC27425.You mount it with Surface Mount.There are 8 pins available in the device.With a supply voltage of 14V, it is designed to operate.The interface chip of the system is BUFFER OR INVERTER BASED MOSFET DRIVER.There is a maximum output current of 4A that can be achieved.There are various useful electronic components in its subcategory MOSFET Drivers.The board has a total of 8 component pins.Based on its basis, it integrates 2 outputs.Mosfet gate drivers supports a current output of 4A.Using 650mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.As a precaution, make sure the supply current is kept at 1.6mA.Due to its power supplies of 4.5/15V, it solves the power supply problem for a wide range of applications.
UCC27425DRG4 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel, P-Channel MOSFET
8 pins
Maximum power dissipation of 650mW
UCC27425DRG4 Applications
There are a lot of Texas Instruments UCC27425DRG4 gate drivers applications.
- High-speed communications
- Isolated Gate Driver Supplies
- High power buffers
- Uninterruptible Power Supplies (UPS)
- Solar inverters
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Line drivers
- Automotive Applications
- AC-DC Inverters
- High-voltage isolated DC-DC converters
