UCC28070PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 800mW |
| Technology | BICMOS |
| Voltage - Supply | 11.2V~21V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.65mm |
| Frequency | 300kHz |
| Base Part Number | UCC28070 |
| Pin Count | 20 |
| Input Voltage-Nom | 12V |
| Supply Voltage-Max (Vsup) | 21V |
| Power Supplies | 12V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER |
| Input Voltage (Min) | 10.5V |
| Output Current-Max | 0.75A |
| Frequency - Switching | Adjustable |
| Input Voltage (Max) | 21V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Mode | Continuous Conduction (CCM) |
| Current - Startup | 20mA |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC28070PWR Overview
There is a 20-TSSOP (0.173, 4.40mm Width) package that comes with it.A Tape & Reel (TR)-packaging method was used to package it.As far as the mounting type of the device is concerned, it is Surface Mount.The voltage supply of 11.2V~21V should be used.A setting of -40°C~125°C has been set on the device.As well as the POWER FACTOR CONTROLLER integrated circuit, this part contains other types of integrated circuits as well.The gadget has several 20 terminals.Current startup state is 20mA.Pin number 20 remains the same for the component.One of the device's best parts is that it has a number of UCC28070 on it.Switching frequency Adjustable is what determines the switching frequency.The 20 pins are summed up.Minimum input voltage 10.5V is needed to operate it.It's a subclass of Switching Regulator or Controllers in a way.The output voltage (Max) of this device is 21V.When the frequency is 300kHz, it is still able to maintain good accuracy.In terms of output current, it works at the maximum in 0.75APower for the component is always provided by a 12V volt supply.Device supplies are 12V.
UCC28070PWR Features
UCC28070PWR Applications
There are a lot of Texas Instruments UCC28070PWR PFC PMICs applications.
- Op-amps
- xEV
- Car lighting
- Transmissioin control
- Engine management
- Switching regulator
- TVS diodes
- UPS (Uninterruptible Power Supply )
- Ultrasound
- 4WD transfercase
